最近買了千斤頂,準備自己動手換機油,不知悅動放油螺絲得用什么型號的扳手 詳細>>
求問安裝原廠行李架的螺絲型號,原廠件沒配,謝謝好心回復 詳細>>
想買螺絲帽保護蓋,哪位高人知道H2輪轂螺絲帽的型號? 詳細>>
貌似兩種都有人說可以。。。 詳細>>
當時4s隨意找了一個上,下來想買幾個備用 詳細>>
車提了想把之前在某寶上夠得一流氓鉤裝上!!可是絲口不對!跑到螺絲大全店鋪去配!人家說是你這是英制的11的。。。≡壑袊的都是什么10. 詳細>>
穿實心條其實沒有什么效果。另求車門內六螺絲刀型號
這幾天自己穿了實心條7.5mm實心的! 四個門 穿好之后倒是沒什么,關門也不影響。 但是今天穿了后門車框,算上門也就是2道實心條,關門稍微用 詳細>>
請問1.5的發電機的緊固螺絲得用什么型號的扳手。還是個6楞的梅花形的.想自己緊一下皮帶。 詳細>>
C5 2.3的空濾,是用六角螺絲固定的,求專用螺絲刀型號,給個型號或者鏈接都可以,謝謝了 詳細>>